Clay Tech

"clay-works make things real"

translated from clazytech.com

I Set Out to Become a Non-Alcoholic Beer Sommelier

My uric acid level on my health checkup has finally crept close to the limit.

Well, that sort of thing happens.

My age, my sweet tooth, and the beer I drink in moderation but still drink give me plenty of excuses.

But numbers don’t wait around, so I decided it was time to take non-alcoholic beer seriously.

That reminded me of the time I drank Suntory’s All-Free a while back.

It wasn’t bad, but it wasn’t quite right either.

It felt like “something beer-like,” and never gave me the satisfaction of having actually drunk beer (this is purely a matter of taste, so apologies to anyone who likes All-Free).

Where did that “not quite right” feeling come from?

There are three ways to make it, and All-Free is “formulated”

Non-alcoholic beer can be made in three broad ways.

The first is to brew ordinary beer and then remove just the alcohol afterward. Makers do this by reducing pressure and evaporating the alcohol at low temperature, or by filtering it out with a membrane. This tends to produce a more beer-like taste, but the difficulty is that aroma compounds tend to evaporate along with the alcohol.

The second is to suppress fermentation to a very weak level, or to use yeast strains that convert little of the sugar into alcohol, so that hardly any alcohol is produced in the first place.

The third is to skip fermentation altogether and build the beer flavor by combining wort or malt extract with flavorings and acidulants. Most Japanese products labeled “0.00%” fall into this formulated type, because running the product through fermentation or dealcoholization processes makes it hard to reliably guarantee 0.00% every time.

All-Free falls into this third category. Because the flavor is built without fermentation, the aroma and body that come from fermentation are hard to achieve. That’s the true identity of that “not quite right” feeling. In exchange, it has zero calories and zero carbs, so the makers clearly designed it with health in mind rather than taste.

0.00% doesn’t mean “zero” — it means “under 0.005%”

0.00% is not a complete zero. Since it’s displayed to two decimal places, anything under 0.005% rounds down to 0.00%. Under the industry’s voluntary standards too, “non-alcoholic” is defined as anything under this 0.005% threshold. By the same logic, “0.0%” can include up to just under 0.05%, and “0%” can include up to just under 0.5%. The contents can differ enormously depending on the number of digits shown (in fact, some wine-taste beverages labeled non-alcoholic reportedly contain up to around 0.5%, so if you’re drinking before driving, it’s worth checking the number of digits on the label).

Incidentally, under the Liquor Tax Act, a beverage is treated as “alcohol” if it contains 1 degree of alcohol, meaning 1% or more. Even at 0.9%, a drink is not legally alcohol. So the 0.00% figure isn’t a number the law requires — the industry sets it through its own voluntary standard.

So how much is 0.005%, exactly?

If a 350 mL can contained 0.005% alcohol, that would work out to 0.0175 mL by volume. Since ethanol’s density is about 0.79 g/mL, that comes to roughly 14 mg by weight. For an ordinary beer at 5% alcohol, the same 350 mL would contain about 17.5 mL, or roughly 14 g by weight. That’s exactly one-thousandth. Even right at the upper limit, it still comes to one-thousandth of a regular beer.

From the measurement side, though, this is actually a fairly tricky number to deal with. The analysis methods the National Tax Agency specifies for measuring alcohol content in alcoholic beverages include distilling the sample and measuring density, or measuring with a gas chromatograph, but the calibration curve for the gas chromatograph method is built over a range of 0–40%, and there’s even a caveat noting that achieving the specified precision becomes difficult around 1% alcohol content. Since the method was originally designed for measuring alcoholic beverages, measuring a trace amount like 0.005% requires a separate calibration curve and sample preparation suited to low concentrations. 0.005% is 50 ppm, and having dealt with ppm-level units in environmental measurement myself, I can roughly imagine how much effort it takes to nail down that digit reliably every single time.

In the first place, measurement can never prove “zero.” All you can say is “below the detection limit.” This holds for sensors and measuring instruments alike: no matter how sensitive the device you bring in, a reading of 0 only ever means “less than the amount the device can distinguish.” A 0.00% label isn’t insisting the content is zero — it’s a declaration that, within the limits of what can be measured, this much has been confirmed.

Conversely, since brewers have to guarantee staying reliably under 0.005% every single time, the method of brewing beer and then removing the alcohol has to keep the variation in leftover alcohol extremely small. It’s no wonder the formulated type is more common.

Even at 0.00%, some products are made by brewing then removing alcohol

So does nothing exist that’s both 0.00% and made by dealcoholization? If formulation were the only option, that would be a bit disappointing.

I looked into it, and it turns out such products do exist.

Asahi’s “Asahi Zero” is properly brewed as beer using domestic malt, then put through the dealcoholization process twice to bring it down to 0.00%. Put through the process just once, it becomes “Beery,” a low-alcohol product at 0.5%. It launched first in the Kinki region in autumn 2023, then went nationwide in April 2024.

Asahi Zero developer interview (Gourmet Watch)

gourmet.watch.impress.co.jp

Kirin also released “Lager Zero” on September 30, 2025, also made by brewing a lager and then removing the alcohol. The company says it spent four years developing it and made its largest-ever capital investment for a non-alcoholic product.

Kirin launches properly brewed non-alcoholic Lager Zero (Kirin Holdings)

www.kirinholdings.com

There’s also a path different from both formulation and dealcoholization. Ryoma 1865 uses a non-fermented process, yet its ingredients are nothing but malt, hops, and carbonation — no flavorings or acidulants. Kirin’s Greens Free and Zero ICHI are also unfermented, made using malt, hops, and first-pressed wort, steering away from reliance on flavorings or artificial sweeteners. Suntory’s The Bezels, for its part, doesn’t start from beer at all. It adds an extract made by removing the alcohol from spirit base liquor to create its aroma, a rather interesting approach (as an engineer, that idea would never have occurred to me).

Kirin launches Greens Free (Kirin Holdings)

www.kirinholdings.com

Suntory launches The Bezels (Suntory)

www.suntory.co.jp

What affects uric acid is alcohol, not purines

Why does beer get singled out as the enemy when it comes to uric acid? I’d assumed it was because of its purine content. So I figured choosing a beer-taste beverage labeled “purine-free” ought to be enough.

As it turns out, that alone isn’t enough. The biggest cause of elevated uric acid is alcohol itself: alcohol increases the amount of uric acid the body produces, and also interferes with the kidneys’ ability to excrete it. So even a beer with the purines removed will still raise uric acid levels as long as it contains alcohol.

Doesn’t Germany, a beer powerhouse, suffer from gout?

So I checked something I’d been curious about for a while. Do people like Germans, who drink large amounts of beer every day, not suffer from uric acid problems the way Japanese people do?

The short answer: they suffer from it just as normally. German even has a word for gout, “Gicht,” and it has long been a familiar ailment there.

In a study that tracked roughly 47,000 male health professionals in the United States (Choi et al., 2004), people who drank two or more glasses of beer a day had about 2.5 times the risk of developing gout. Spirits at two drinks raised the risk about 1.6 times, while wine at two glasses showed no increase at all. Of all alcoholic drinks, beer, of all things, came out the worst.

Beer, liquor linked to gout risk (ScienceDaily, 2004)

www.sciencedaily.com

On the constitutional side, though, Japanese people are actually at a disadvantage. There’s a protein called ABCG2 that works to excrete uric acid from the body, and a study examining 2,150 Japanese people found that more than half carried a gene variant with reduced function in this role. Europeans, meanwhile, tend to see elevated uric acid from obesity and excess fructose intake, so each group suffers for its own reasons.

Identification of ABCG2 dysfunction as a major factor contributing to gout (Fujita Health University)

pure.fujita-hu.ac.jp

If there’s a difference, it’s in the timing of when people notice. In Japan, uric acid levels are measured every year in health checkups, so people can catch it with a number before it starts to hurt. That’s exactly what happened to me, which is why I’m doing this now. Germany has no checkup that everyone undergoes annually, and European guidelines generally don’t treat asymptomatic high uric acid levels at all. So many people only notice after a gout attack hits, and afterward tend to keep drinking while controlling uric acid with medication rather than quitting alcohol.

In short, what differs between Japan and Germany isn’t the underlying risk, but the chance to learn the number and how people deal with it once they know.

Back to that first “not quite right”

If you’re worried about your uric acid level, what matters is alcohol rather than purines, so choosing a non-alcoholic beer with the alcohol removed makes reasonable sense. And even at 0.00%, products made by properly brewing beer and then removing the alcohol, rather than formulating it, are now available from major domestic makers.

I’ve at least figured out why All-Free felt not quite right.

And so, at this rate, I seem to be on track to become a non-alcoholic sommelier for a while.

References

This piece was planned and directed by Kuzuryu, with the writing done by AI.


Originally published in Japanese at https://clazytech.com/2026/11/1908/. Translated with LLM assistance and reviewed before publication.